Tag Archives: sulfur scavenger

All About Silane Water Repellent Sealer

All About Silane Water Repellent Sealer
All About Silane Water Repellent Sealer

Buildings with masonry, mortar, and concrete are seen to absorb a lot of water because of their capillary structure and pore. To eliminate or reduce damage caused by the absorption of moisture silane water repellent sealer is applied. This is a very common water repellent sealer that is extracted from silicone molecules
Properties Of Silane Sealers
Here are the properties of Silane sealers. Have a look.
● The surface on which this is applied does not undergo any physical transformation and there is gloss or shine.
● This permits the surface to breathe thus making sure that the moisture escapes and also repels water from the surface
● This sealer penetrates well beneath the surface and adds protection
Why Should You Consider Using This Sealer?
Now you will find many sealers in the market. They have pluses and minuses. This sealer is made from a bigger molecular structure, which allows the sealer to penetrate a dense surface like brick, but what it does makes the surface hydrophobic. Silane creates a chemical bond with the pores below and inside the bricks and this is what does not allow the water to enter.
Since this sealer penetrates the surface, it allows it to retain its original texture. No traces of the sealer will be found on the surface sulfur scavenger. This sealer does a very good job in adding protection to various structures from moisture even in exposed and high-traffic areas.
These sealers contain almost no VOC and they are also water-based. Their chemical setup allows them to penetrate well below the surface and add strong protection. These are highly resistant to degradation caused by UV. The best part about this sealer is that it does not trap water vapor as it is breathable.
How To Select A Good Silane Sealer
Here are certain that you should look for in such sealers. Take a look.
● The sealer should be water-based, which means the VOC content will be a lot lower, and most importantly they will not be flammable. They are also easy to clean once you are done with the application.
● There are certain sealers that can have high volumes of VOC in them. You should know that sealers with low VOC are environment and user friendly. They are not harmful or dangerous.
Before you go for a full application make sure you test it out on a patch to check the coverage as various surfaces have different properties. You must also make sure that the content mentioned in the sealer will be compatible for the surface on which it is to be applied. The higher the solid content at surfactant additive, the better the sealer will work on hollow blocks of concrete, porous surfaces, and absorptive surfaces. So, this all you need to know about silane water repellent sealer. If you feel confused you could always ask professionals for their advice and also read on the several brands that make this. Make sure you go through the contents before you go out and buy such sealers from the market.

Contact US:

Chemical Products Industries, Inc.

Address: 7649 SW 34th St, Oklahoma City, OK
Phone: (800) 624-4356